Vertical Brace

The Cyclone vertical brace gate is a versatile ‘value for money’ rural gate.

Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.

 
  • Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).
  • Welded collar attached at hinge end to increase compatibilty with a broader range of gate hardware, including brooker hinges. The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.
  • The pipe used in the gate fram and brace is hot dipped galvanised both inside and out providing corrosion resistance.
  • Each MOQ packed with both left and right hand side configurations and palletised for safer and easier handling.
  • Full notch weld construction.
Cyclone vertical brace gate
Cyclone vertical brace gate
Options:
Variants:


Vertical Brace Gates


Code


Material Description


Height


Actual Width


Gate opening


Weight

221093 0.97m Galvanised Vertical Brace Access Gate (3') 1170mm 970mm 1.0m (3') 9kg
318399 1.17m Galvanised Vertical Brace Gate (4') 1170mm 1170mm 1.2m (4') 12kg
318450 1.47m Galvanised Vertical Brace Gate (5') 1170mm 1470mm 1.5m (5') 15kg
318451 1.77m Galvanised Vertical Brace Gate (6') 1170mm 1770mm 1.8m (6') 17kg
220475 2.37m Galvanised Vertical Brace Gate (8') 1170mm 2370mm 2.4m (8') 21kg
220481 2.97m Galvanised Vertical Brace Gate (10') 1170mm 2970mm 3.0m (10') 25kg
220487 3.57m Galvanised Vertical Brace Gate (12') 1170mm 3570mm 3.6m (12') 29kg
220493 4.17m Galvanised Vertical Brace Gate (14') 1170mm 4170mm 4.2m (14') 34kg
220497 4.77m Galvanised Vertical Brace Gate (16') 1170mm 4770mm 4.8m (16') 39kg